Version 11. adaptation for the SMD HW version of the device (v.11.0.2) (Arduino IDE v.1.6.x or higher)

This is an upgraded Arduino sketch for the newly released (Nov. 2016) SMD based hardware version

One preset for  NEC mini iR remote:
https://www.dropbox.com/s/4azjjd7wf5geh8n/GeigerKit_v11_0_2_nec_progmemfix_One_Button_2.zip?dl=0

(for those who use other development environments or want to upload with the XLoader, utility here is a compiled hex file with preset for the NEC iR remote protocol
https://www.dropbox.com/s/hb5i3vb9lyb4oa0/GeigerKit_v11_0_2_nec_progmemfix_One_Button_2.hex?dl=0 )

One preset for SONY iR remote protocol:
https://www.dropbox.com/s/fixvux30zslw6ty/GeigerKit_v11_0_2_nec_progmemfix_One_Button_2_Sony.zip?dl=0

(for those who use other development environments or want to upload with the XLoader utility, here is a compiled hex file with preset for the Sony iR remote protocol:
https://www.dropbox.com/s/999srak0y1jt4ex/GeigerKit_v11_0_2_nec_progmemfix_One_Button_2_Sony.hex?dl=0 )

Arduino libraries are here (don't forget to add them to you Arduino IDE libraries):
https://www.dropbox.com/s/muhl12w5vhjlkqv/GeigerKit%20Libraries%20SMD.zip?dl=0

note:

The new board is driven by a 10MHz crystal. Please add a new board to your Arduino IDE.
Instructions how to add this board to your Arduino IDE using the Boards Manager  can be found here: https://github.com/impexeris/Arduino-Geiger-PCB/wiki

note2: Arduino IDE version higher than 1.8.12 doesn't alow to choose the programmer for burning bootloader so please use 1.8.12 or previous version if you need to do that.


You can buy the new SMD based Geiger counter electronics on eBay here:

http://www.ebay.com/sch/impexeris/m.html?_nkw=&_armrs=1&_ipg=&_from=

translated specs of si22G tube

Optiboot bootloader for Atmega328P driven by 10MHz crystal 115200 bps 8N1

10MHz

ATMEGA328P

I have recently compiled an Optiboot bootloader for the Atmega328P MCU driven by the 10MHz crystal and working at 115200 bps baud rate (8N1).

Instructions how to add this board to your Arduino IDE using the Boards Manager  can be found here: https://github.com/impexeris/Arduino-Geiger-PCB/wiki

More about the Optiboot boot loader can be found here:

https://github.com/Optiboot/optiboot

and here:

https://github.com/Optiboot/optiboot/wiki

An impressive and inspiring design of the equipment based on the SBT11-bundle kit by Steffen from Moosburg (Germany)

Personally to me it is one of the most impressing and professional equipment designs based on the 

SBT11 kit . So much attention to detail, functionality and usability. Please take your time to enjoy these inspiring pictures!

One of my customers have sent in several pictures from Chernobyl disaster location. He has taken these pictures in June 2016 - it is still "hot" there.

Nuclear Radiation Survey Meter in the new factory made quality ABS plastic enclosure (phased out)

This enclosure which was designed for the "through the hole" geiger kit which I was previously selling on eBay. If you need same type of enclosure for the current - SMD version please check here:

---

translated specs of si29bg tube

here is the post with inside images of si29bg