Version 11. adaptation for the SMD HW version of the device (v.11.0.2) (Arduino IDE v.1.6.x or higher)

This is an upgraded Arduino sketch for the newly released (Nov. 2016) SMD based hardware version

One preset for  NEC mini iR remote:
https://www.dropbox.com/s/4azjjd7wf5geh8n/GeigerKit_v11_0_2_nec_progmemfix_One_Button_2.zip?dl=0

(for those who use other development environments or want to upload with the XLoader, utility here is a compiled hex file with preset for the NEC iR remote protocol
https://www.dropbox.com/s/hb5i3vb9lyb4oa0/GeigerKit_v11_0_2_nec_progmemfix_One_Button_2.hex?dl=0 )

One preset for SONY iR remote protocol:
https://www.dropbox.com/s/fixvux30zslw6ty/GeigerKit_v11_0_2_nec_progmemfix_One_Button_2_Sony.zip?dl=0

(for those who use other development environments or want to upload with the XLoader utility, here is a compiled hex file with preset for the Sony iR remote protocol:
https://www.dropbox.com/s/999srak0y1jt4ex/GeigerKit_v11_0_2_nec_progmemfix_One_Button_2_Sony.hex?dl=0 )

Arduino libraries are here (don't forget to add them to you Arduino IDE libraries):
https://www.dropbox.com/s/muhl12w5vhjlkqv/GeigerKit%20Libraries%20SMD.zip?dl=0

note:

The new board is driven by a 10MHz crystal. Please add a new board to your Arduino IDE.
Instructions how to add this board to your Arduino IDE using the Boards Manager  can be found here: https://github.com/impexeris/Arduino-Geiger-PCB/wiki

note2: Arduino IDE version higher than 1.8.12 doesn't alow to choose the programmer for burning bootloader so please use 1.8.12 or previous version if you need to do that.


You can buy the new SMD based Geiger counter electronics on eBay here:

http://www.ebay.com/sch/impexeris/m.html?_nkw=&_armrs=1&_ipg=&_from=