2011 m. liepos 28 d., ketvirtadienis


http://www.youtube.com/watch?v=EzXb-15rzK8

This is a working arduino geiger counter assembled from the exact set of parts which I have photographed in previous posts. Here it is working connected to computer. This is to demonstrate how the detector part works togeather with the Arduino part. In addition to flashing the LED and sounding the buzzer when Ionizing nuclear radiation particle is detected by the geiger tube SI29-BG, it also runs a counting program on the atmega328p processor and sends data through serial port to computer.

http://www.youtube.com/watch?v=vbDveyMODus
This is a working arduino geiger counter assembled from the exact set of parts which I have photographed in previous posts. Here it is working not connected to computer. This is to demonstrate how the detector part works (flashes LED and sounds the buzzer when Ionizing nuclear radiation particle is detected by the geiger tube SI29-BG)

2011 m. liepos 27 d., trečiadienis

Arduino set of components including Geiger–Müller tube


A set of electronic components including Geiger–Müller tube, which can be used to build an Arduino Geiger ionizing radiation counter.

Arduino set of components


A set of electronic components which can be used to build an Arduino Geiger ionizing radiation counter.

Simple set of components


Set of electronic components which can be used to make a simple electronic circuit for the Geiger ionizing radiation detector.