2016 m. liepos 11 d., pirmadienis

Optiboot bootloader for Atmega328P driven by 10MHz crystal 115200 bps 8N1

10MHz



ATMEGA328P


I have recently compiled an Optiboot bootloader for the Atmega328P MCU driven by the 10MHz crystal and working at 115200 bps baud rate (8N1).

Instructions how to add this board to your Arduino IDE using the Boards Manager  can be found here: https://github.com/impexeris/Arduino-Geiger-PCB/wiki

More about the Optiboot boot loader can be found here:
and here:

Komentarų nėra:

Rašyti komentarą