A newly designed 3D printable enclosure by RadioNuclei95 on thingiverse.com (thing number1418799)

Recently several nice 3D-printable enclosures for geiger counters have been designed and shared on thingiverse.com  so if you are a 3D printing enthusiast and have a 3D printer it might well be of an interest.

Here is the one (thing number 1418799) which is for the kit without the LCD shield (where the LCD is connected by multi-wire cable). It is designed by the thingiverse.com user RadioNuclei95 .
The enclosure was originally designed by the user for two tubes SBM-20 which is installed inside and there is a hole for connecting SBT11 probe  externally.

Below is the SBT11 probe (thing number 098311on thingiverse.com )designed by the RadioNuclei95