Version 10.2. adaptation for the LCD shield (v.10.2.1)

v.10.1.2 - adaptation modifications are listed below:

PIN definitions are adapted to work with LCD shield as follows:

#define BUTTON_PIN           11  (in v.10.1 was 10)

#define ALARM_PIN             10  (in v.10.1 was 15)

#define NULL_BTN_PIN       15  (in v.10.1 was 11)

 simplified serial port output to work with freeware Radiation Logger software by radiohobbystore:

https://www.dropbox.com/s/dhdojkbc1a5e7co/Radiation_Logger.zip
https://www.dropbox.com/s/jm29nrq98ezv2qx/Radiation%20Logger%20how%20to.txt

 is now configured to be the default output changable back by menu (note: use of menu needs connection of IR receiver)

If you want CPM, [dose unit], Vcc to be the set as output format during the RESET_ALL (i.e. when the #define RESET_ALL true) find and change the line in Menu from:

writeParam(true,RADLOGGER_ADDR); 

back to:

writeParam(false,RADLOGGER_ADDR);

The modified sketch can be downloaded here: https://www.dropbox.com/s/od831jqjbnw4x41/GeigerKit_v10_2_1.zip

Libraries can be downloaded from here:
https://www.dropbox.com/s/1j1a9hlhodb232m/GeigerKit%20Libraries.zip